english 
Three - position pneumatic actuators
function by using air pressure to control the position of a mechanical
component. Here's a general overview of how they work:
Air Supply and Control: The actuator is
connected to an air supply system. A control valve regulates the flow of
compressed air into the actuator. When the control valve receives a signal, it
opens or closes to allow air to enter or exit specific chambers within the
actuator.
Piston or Diaphragm Movement: Inside the
actuator, there is a piston or diaphragm. When air enters one side of the
piston or diaphragm, it creates a force that pushes it in one direction. This
movement is converted into linear or rotary motion, depending on the actuator
design. For example, in a rack - and - pinion actuator, the linear movement of
the piston drives a rack that rotates a pinion, resulting in rotary motion.
Position Sensing and Feedback: To achieve
three - position control, the actuator is equipped with position - sensing
mechanisms. These can be mechanical switches, limit switches, or sensors that
detect the position of the moving part. The sensor sends feedback to the
control system, which uses this information to adjust the air supply and
maintain the actuator in the desired position. If the actuator is not in the
correct position, the control system will make corrections by adjusting the air
flow until the desired position is reached.
If you want to learn more about low-priced products, please visit the following website: www.xm-valveactuator.com
