Water Treatment Actuator Selection Guide
Essential criteria for choosing reliable valve actuators in water treatment systems
1. Material Compatibility
- Choose actuators with corrosion-resistant materials: 316 stainless steel housings resist waterborne chemicals
- Use EPDM or Viton seals to withstand chlorine, fluoride, or pH fluctuations common in water treatment
- Avoid materials prone to rust that could contaminate water supplies
- Consider FDA-approved materials for potable water applications
2. Torque and Size Matching
- Calculate required torque based on pipe diameter and water pressure
- Larger valves (≥DN100) need higher torque actuators to handle flow resistance
- Ensure the actuator's output exceeds system demands by 20-30% for reliability
- Consider dynamic torque requirements during valve opening/closing cycles
3. Protection and Hygiene
- Opt for IP65/IP66 ratings to prevent water ingress in wet facilities
- Hygienic designs reduce bacterial growth, critical for potable water systems
- Avoid lubricants with toxic additives that could leach into water
- Smooth surfaces and minimal crevices prevent biofilm formation
4. Control Features
- For automated systems, select actuators with positioners to regulate flow precisely
- Single-acting models with spring returns offer fail-safe closure during air loss
- Consider smart actuators with diagnostic capabilities for predictive maintenance
- Ensure compatibility with your control system (4-20mA, Modbus, HART, etc.)
5. Compliance with Standards
- Verify adherence to water safety regulations for potable applications
- Ensure certifications for materials in contact with drinking water
- Avoid non-compliant components that risk contamination or regulatory penalties
- Check for NSF/ANSI 61, WRAS, or other regional water quality certifications
If you want to learn more about low-priced products, please visit the following website: www.xm-valveactuator.com
