Pneumatic actuator is an actuating device that uses pneumatic pressure to drive the opening, closing or regulating of valves, also known as pneumatic actuator or pneumatic device, but generally referred to as pneumatic head. Pneumatic actuators are sometimes equipped with certain auxiliary devices. Commonly used are valve positioners and handwheel mechanisms. The function of valve positioner is to use feedback principle to improve the performance of the actuator, so that the actuator can achieve accurate positioning according to the control signal of the controller. The function of the handwheel mechanism is to directly operate the control valve to maintain normal production when the control system is shut down, gas is stopped, the controller has no output, or the actuator fails.
90degree,180 degree,360degree Pneumatic Rotary Actuator animation principle
As an important on-site control equipment in the automatic control system, the angular-turn pneumatic actuator can provide the most reasonable solution within the output drawing range of 6N.m∽3200 N.m.
Adopting the ISO5211 bottom connection standard, it can be easily matched with rotary valves (such as butterfly valves, ball valves, plug valves) and damper phases. The output angle is 0∽110° or other angles. It can be widely used in industrial sectors such as metallurgy, petroleum, chemical industry, water conservancy, machinery, light industry, fire protection and environmental protection.
If you want to learn more about low-priced products, please visit the following website: www.xm-valveactuator.com